Cover, Differential: Installation: Installation

WARNING: This page is about a different car, the 2012 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Applying Axle RTV Sealant To Housing Cover

Courtesy of CHRYSLER GROUP, LLC

Clean cover and mating surface.
Apply a bead of Mopar Axle RTV sealant (1) or equivalent to the differential cover (2).
CAUTION:
If cover is not installed within 3 to 5 minutes, the cover must be cleaned and new RTV applied. Failure to follow these instructions will result in a leak.

Fig 2: Differential Cover
Courtesy of CHRYSLER GROUP, LLC
Install differential housing cover (1) and tighten bolts in a criss-cross pattern to 19-26 N.m (14-19 ft. lbs.).

Fig 3: Identifying Oil Filter Drain Tray & Vent Hose
Courtesy of CHRYSLER GROUP, LLC
Install oil filter drain tray (1) and tighten nut to 23 N.m (200 in. lbs.).
Install vent hose (2) on differential cover with new clamp.

Fig 4: Identifying Front Axle Bracket Cradle Nut & Front Axle Bracket Bolts
Courtesy of CHRYSLER GROUP, LLC
Install front axle bracket bolts (2) and nuts. Tighten nuts to 61 N.m (45 ft. lbs.).
Tighten front axle bracket cradle nut (1) to 61 N.m (45 ft. lbs.).
Install skid plate.