Sensor, Boost Pressure: Removal: Removal

WARNING: This page is about a different car, the 2012 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Engine Cover

Courtesy of CHRYSLER GROUP, LLC

Disconnect the negative battery cable.
Remove the engine cover (1).

Fig 2: Intake Air Temperature Sensor/Boost Pressure Sensor, Fastener & Connector
Courtesy of CHRYSLER GROUP, LLC
Disconnect the boost pressure sensor wire harness connector (1).
Remove fastener (3), and the boost pressure sensor (2).