Front Axle Disconnect

WARNING: This page is about a different car, the 2012 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Raise and support the vehicle.

Fig 1: Left Drive Axle & Intermediate Shaft
Courtesy of CHRYSLER GROUP, LLC

NOTE:
The intermediate shaft is serviced only as a complete assembly.
Remove left halfshaft assembly (2). Refer to REMOVAL or REMOVAL .

Fig 2: Front Axle Disconnect Solenoid Harness Connector
Courtesy of CHRYSLER GROUP, LLC
Disconnect the front axle disconnect solenoid harness connector (1).

Fig 3: Bolts From Front Axle Disconnect Solenoid
Courtesy of CHRYSLER GROUP, LLC
Remove the 3 bolts (5), (6), (7) from the front axle disconnect solenoid, and remove the front axle disconnect solenoid (8).

Fig 4: Bolts From Front Axle Disconnect Bracket
Courtesy of CHRYSLER GROUP, LLC
Remove the 3 bolts (1), (2), (3) from the front axle disconnect bracket, and remove the front axle disconnect bracket (4).

Fig 5: Bolts From Front Axle Disconnect Solenoid
Courtesy of CHRYSLER GROUP, LLC
Remove four bolts (1) from the front axle disconnect (3) and remove it from the engine