LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2012 >> Compass Limited, AWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Electronic Control Modules (Service Information)) >> Module, Drivetrain Control >> Removal >> Removal

Module, Drivetrain Control: Removal: Removal

WARNING: This page is about a different car, the 2012 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. To gain access to the Drive Train Contol Module (DTCM), remove the driver side foot rest. Refer to FOOT REST, FLOOR, FRONT, REMOVAL .
    Fig 1: Drive Train Control Module
    GC0095226Courtesy of CHRYSLER GROUP, LLC
  2. Loosen the mounting nut (2) from mounting stud (6), remove mounting nut (4) from mounting stud (5).
  3. Slide DTCM from mounting stud (6) and remove from drivers side foot rest (3).
scientia non olet · About LEMON Manuals