LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2012 >> Compass Limited, AWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 717 (Audio/Video/Entertainment/Connectivity (Service Information)) >> Module, Radio Antenna >> Removal >> Capacitor

Module, Radio Antenna: Removal: Capacitor

WARNING: This page is about a different car, the 2020 Chrysler 300 and 2019 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
GC0170609Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative cable from the battery. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector before disconnecting the negative cable from the battery.
  2. Remove the trim from the upper right C-pillar (1). Refer to PANEL, C-PILLAR TRIM, REMOVAL .
  3. Disconnect the wire harness connector (4) from the antenna capacitor (5).
  4. Remove the fastener (6) that secures the antenna capacitor to the C-pillar.
  5. Disengage the mounting tab of the antenna capacitor from the slotted hole in the C-pillar (1) and remove the capacitor from the vehicle.
scientia non olet · About LEMON Manuals