LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2012 >> Compass Limited, AWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 714 (Message Center (Service Information)) >> Sensor, Ambient Temperature >> Removal

Sensor, Ambient Temperature: Removal

WARNING: This page is about a different car, the 2020 Chrysler 300 and 2019 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the belly pan. Refer to BELLY PAN, REMOVAL .
    GC0080152Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the wire harness connector (1) from the ambient temperature sensor (2).
    GC0192468Courtesy of CHRYSLER GROUP, LLC
  4. Remove the fastener (1) that secures the ambient temperature sensor bracket to the front bumper beam.
  5. Remove the ambient temperature sensor from the vehicle.
scientia non olet · About LEMON Manuals