LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2012 >> Compass Limited, AWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 687 (Antilock Brake System (Abs) (Service Information)) >> Electrical >> Sensor, Dynamics >> Removal

Sensor, Dynamics: Removal

WARNING: This page is about a different car, the 2020 Chrysler 300 and 2019 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove floor console. Refer to CONSOLE, FLOOR, REMOVAL .
    GC0162409Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect wiring harness connector (2) at the sensor (1).
  4. Remove two nuts (3) and the sensor (1).
scientia non olet · About LEMON Manuals