LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2012 >> Compass Limited, AWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 669 (Rear Driveline Module - MK) >> Seal, Output Flange >> Installation

Seal, Output Flange: Installation

WARNING: This page is about a different car, the 2017 Jeep Patriot and 2017 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
GC0083901Courtesy of CHRYSLER GROUP, LLC
  1. Place the seal on the installer.
    GC0083902Courtesy of CHRYSLER GROUP, LLC
  2. Install the pinion side seal using Installer (special tool #9893, Installer, Seal) and Handle (special tool #C-4171, Driver Handle, Universal).
  3. Install right side halfshaft. Refer to INSTALLATION .
    GC0083901Courtesy of CHRYSLER GROUP, LLC
  4. Place the seal on the installer.
    GC0083903Courtesy of CHRYSLER GROUP, LLC
  5. Install the ring gear side seal using Installer (special tool #9893, Installer, Seal) and Handle (special tool #C-4171, Driver Handle, Universal).
  6. Install left side halfshaft. Refer to INSTALLATION .
  7. Fill RDA as needed. Refer to SPECIFICATIONS .
  8. Lower vehicle and road test.
scientia non olet · About LEMON Manuals