Non SRT
WARNING: This page is about a different car, the 2012 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
The front suspension for both All-Wheel-Drive (AWD) and Non SRT Rear-Wheel-Drive (RWD) vehicles is a long and short arm design.
Each side of the AWD front suspension includes the following components:
- Hub And Bearing
- Knuckle (5)
- Lower Control Arm (4)
- Shock Assembly (2)
- Stabilizer Bar and Link (3)
- Upper Control Arm (1)
Each side of the Non SRT RWD front suspension includes the following components:
- Hub And Bearing
- Knuckle (3)
- Lower Control Arm (5)
- Shock Assembly (1)
- Stabilizer Bar and Link (7)
- Tension Strut (4)
- Upper Control Arm (2)