Solenoid, Variable Valve Timing: Installation: Right

WARNING: This page is about a different car, the 2016 Dodge Charger and 2015 Dodge Charger. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: VVT Seal

Courtesy of CHRYSLER GROUP, LLC

Install the Variable Valve Timing Solenoid (VVTS) seals (1). The seals can be reused if not damaged.

Fig 2: Variable Valve Timing Solenoids, Connectors & Bolts
Courtesy of CHRYSLER GROUP, LLC
Refer to the markings made during disassembly and install the intake VVTS (2) and the exhaust VVTS (4) in their original locations.
Tighten the VVTS bolts (3) to the proper specification. Refer to TORQUE SPECIFICATIONS .
Connect the VVTS wire harness connector (1).
Install the air cleaner body. Refer to BODY, AIR CLEANER, INSTALLATION, 3.6L , BODY, AIR CLEANER, INSTALLATION, 5.7L , BODY, AIR CLEANER, INSTALLATION, 6.2L or BODY, AIR CLEANER, INSTALLATION, 6.4L .

Fig 3: Engine Cover
Courtesy of CHRYSLER GROUP, LLC
Install the engine cover (1).
Connect the negative battery cable.

NOTE:

The Cam/Crank Variation Relearn procedure must be performed using the scan tool anytime there has been a repair/replacement made to a powertrain system, for example: flywheel, valvetrain, camshaft and/or crankshaft sensors or components.