LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2012 >> Compass Limited, AWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 489 (Electronic Control Modules (Service Information)) >> Module, Transmission Control >> Removal >> Removal - Nag1

Removal - Nag1

WARNING: This page is about a different car, the 2016 Dodge Charger and 2015 Dodge Charger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery negative cable.
  2. Remove driver side under instrument panel silencer pad and courtesy lamp.
  3. Remove driver side knee blocker.
    Fig 1: Identifying TCM & Harness Connectors
    GC0154671Courtesy of CHRYSLER GROUP, LLC
  4. Release the lock tabs on the Transmission Control Module (TCM) (1) wire connectors (2) and pull the wire connectors from the TCM.
    Fig 2: Identifying TCM & Screws
    GC0154681Courtesy of CHRYSLER GROUP, LLC
  5. Remove the screws (2) holding the TCM (1) to the instrument panel support beam.
  6. Separate the TCM (1) from the instrument panel.
scientia non olet · About LEMON Manuals