Right Side
WARNING: This page is about a different car, the 2009 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle.
- Remove the right side tire and wheel assembly.
- Remove the upper ball joint nut.
- Separate the upper ball joint from the steering knuckle (3) using remover 9360 (2).
- Lower the vehicle.
- Remove the air box assembly. Refer to Engine/Air Intake System/AIR CLEANER - Removal .
- Remove the upper control arm rear bolt/nut.
- Remove the upper control arm front bolt/nut.
- Remove the upper control arm from the vehicle.