LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2012 >> Compass Limited, AWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Message Center (Service Information)) >> Sensor, Ambient Temperature >> Removal >> Removal

Sensor, Ambient Temperature: Removal: Removal

WARNING: This page is about a different car, the 2012 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the battery negative cable.
  2. Remove the belly pan. Refer to BELLY PAN, REMOVAL .
    Fig 1: Ambient Temperature Sensor Connector
    GC0080152Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the wire harness connector (1) from the ambient temperature sensor (2).
    Fig 2: Ambient Temperature Sensor Fastener
    GC0080153Courtesy of CHRYSLER GROUP, LLC
  4. Remove the fastener that secures the ambient temperature sensor bracket to the front bumper beam.
  5. Remove the ambient temperature sensor from the vehicle.
scientia non olet · About LEMON Manuals