Diagnostic Test
- ACTIVE DTC NOTE:
For vehicle communication problems, use the scan tool to refer to the Network Review Screen. The screen depicts a high level view of the vehicle network. Fault and problem areas appear in red. Selecting any of the network components allows access to the source of the problem.
- Ignition on, engine not running.
- With a scan tool, select View DTCs.
Is the status Active for this DTC?
Yes
- Refer to U0168-LOST COMMUNICATION WITH VEHICLE SECURITY CONTROL MODULE (SKREEM/WCM) and perform the U0168-Lost Communication with Vehicle Security Module (WCM) diagnostic procedure.
No
- Refer to COMMUNICATION - DIAGNOSIS AND TESTING and perform the Stored Lost Communication DTC diagnostic procedure.