LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2012 >> Compass Limited, AWD, Automatic CVT, CVT2L >> Repair and Diagnosis >> External Pages >> Different car >> Section 717 (Audio/Video/Entertainment/Connectivity (Service Information)) >> Camera, Rear >> Removal

Camera, Rear: Removal

WARNING: This page is about a different car, the 2020 Chrysler 300 and 2019 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
GC0170874Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the Center High Mounted Stop Lamp (CHMSL). Refer to LAMP, CENTER HIGH MOUNTED STOP, REMOVAL .
  3. Disconnect the jumper wire harness connector (3) from the Rear View Camera (RVC) (2).
  4. Remove the fasteners from the RVC mounting bracket (1) and remove the RVC (2) and mounting bracket from the CHMSL.
    GC0170855Courtesy of CHRYSLER GROUP, LLC
  5. Separate the RVC (2) from the mounting bracket (1).
scientia non olet · About LEMON Manuals