Section 717 (Audio/Video/Entertainment/Connectivity (Service Information)): Amplifier: Removal
WARNING: This page is about a different car, the 2020 Chrysler 300 and 2019 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the negative cable from the battery. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector before disconnecting the negative cable from the battery.
- Remove the steering column opening cover from the instrument panel. Refer to COVER, STEERING COLUMN OPENING, REMOVAL .
- If equipped, remove the Transmission Control Module (TCM) from the instrument panel support structure. Refer to MODULE, TRANSMISSION CONTROL (TCM), REMOVAL .
- Disconnect the wire harness connectors (1, 3) from the audio power amplifier (2).
- Loosen each of the fasteners that secure the amplifier to the vertical bracket of the instrument panel support structure.
- Slide the amplifier upward far enough to disengage the mounting fasteners from the keyed holes in the vertical bracket.
- Remove the amplifier from under the instrument panel.