LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2012 >> Compass Limited, AWD, Automatic CVT, CVT2L >> Repair and Diagnosis >> External Pages >> Different car >> Section 707 (Ignition System (Service Information)) >> Capacitor, Ignition >> Installation >> 3.6L

Capacitor, Ignition: Installation: 3.6L

WARNING: This page is about a different car, the 2020 Chrysler 300 and 2019 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
GC0144203Courtesy of CHRYSLER GROUP, LLC
  1. Install the ignition capacitor (2). Tighten bolt (3) to the proper specification. Refer to TORQUE SPECIFICATIONS  .
  2. Connect the ignition capacitor wire harness connector (1).
  3. Install the engine cover.
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals