LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2012 >> Compass Limited, AWD, Automatic CVT, CVT2L >> Repair and Diagnosis >> External Pages >> Different car >> Section 508 (Ignition System (Service Information)) >> Solenoid, Variable Valve Timing >> Removal >> Right

Solenoid, Variable Valve Timing: Removal: Right

WARNING: This page is about a different car, the 2016 Dodge Charger and 2015 Dodge Charger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable.
    Fig 1: Engine Cover
    GC0144028Courtesy of CHRYSLER GROUP, LLC
  2. Remove the engine cover (1).
  3. Remove the air cleaner body. Refer to BODY, AIR CLEANER, REMOVAL, 3.6L , BODY, AIR CLEANER, REMOVAL, 5.7L , BODY, AIR CLEANER, REMOVAL, 6.2L or BODY, AIR CLEANER, REMOVAL, 6.4L .
  4. NOTE:

    Mark the Variable Valve Timing Solenoid (VVTS) connectors (1) with a paint pen or equivalent so that they may be reinstalled in their original locations.

  5. Mark the intake VVTS (2) and the exhaust VVTS solenoid (4) with a paint pen or equivalent so that they may be reinstalled in their original locations.
    Fig 2: Variable Valve Timing Solenoids, Connectors & Bolts
    GC0144211Courtesy of CHRYSLER GROUP, LLC
  6. Disconnect the VVTS wire harness connector (1).
  7. Remove bolts (3) and pull the VVTS from the cylinder head cover.
    Fig 3: VVT Seal
    GC0144209Courtesy of CHRYSLER GROUP, LLC
  8. The seal (1) can be reused if not damaged.
scientia non olet · About LEMON Manuals