Capacitor, Ignition: Removal: 6.2L
WARNING: This page is about a different car, the 2016 Dodge Charger and 2015 Dodge Charger. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the negative battery cable.
- Remove the engine cover(s) (1).
NOTE:
The left ignition capacitor (1) is attached at rear cylinder head and the right ignition capacitor (1) is attached at rear of the cylinder head.
- Remove the ignition capacitor wire harness connector.
- Remove bolt (2) and the ignition capacitor (1).