LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2012 >> Compass Limited, AWD, Automatic CVT, CVT2L >> Repair and Diagnosis >> External Pages >> Different car >> Section 508 (Ignition System (Service Information)) >> Capacitor, Ignition >> Installation >> 3.6L

Capacitor, Ignition: Installation: 3.6L

WARNING: This page is about a different car, the 2016 Dodge Charger and 2015 Dodge Charger. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Electrical Connector, Mounting Bolt & Ignition Coil Capacitor
GC0144203Courtesy of CHRYSLER GROUP, LLC
  1. Install the ignition capacitor (2). Tighten bolt (3) to the proper specification. Refer to TORQUE SPECIFICATIONS  .
  2. Connect the ignition capacitor wire harness connector (1).
  3. Install the engine cover.
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals