LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2012 >> Compass Limited, AWD, Automatic CVT, CVT2L >> Repair and Diagnosis >> External Pages >> Different car >> Section 211 (5.7L Engine (Service Information)) >> Air Intake System >> Body, Air Cleaner >> Installation >> Installation

Body, Air Cleaner: Installation: Installation

WARNING: This page is about a different car, the 2012 Dodge Charger. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Air Filter Assembly
GC0132938Courtesy of CHRYSLER GROUP, LLC
  1. Position the air cleaner housing into the engine compartment.
  2. Install the air cleaner housing retaining bolt (3) and tighten to 5 N.m (44 in. lbs.).
  3. Connect the air duct to the throttle body and the air cleaner housing and tighten clamps to 3 N.m (30 in. lbs.).
  4. Connect the make up air hose (MUA) (2).
  5. Connect the intake air temperature (IAT) sensor (5) electrical connector.
  6. Position the engine cover (1) and secure the retaining grommets onto the ball studs.
scientia non olet · About LEMON Manuals