Section 522 (Audio/Video/Entertainment/Connectivity (Service Information)): Speaker: Operation: Base
WARNING: This page is about a different car, the 2016 Dodge Charger and 2015 Dodge Charger. However, it is still accessible from the selected car via links, so may be relevant.
Two wires connected to each speaker, one feed circuit (+) and one return circuit (-), allow the audio output signal electrical current from the amplifier section of the Radio Receiver Module (RRM) (also known as the radio or the head unit) to flow through each speaker voice coil.
The hard wired circuits between the RRM and the speakers may be diagnosed using conventional diagnostic tools and procedures. Refer to the appropriate wiring information. The wiring information includes wiring diagrams, proper wire and connector repair procedures, details of wire harness routing and retention, connector pin out information and location views for the various wire harness connectors, splices and grounds.