Pedal, Accelerator: Installation: Installation

WARNING: This page is about a different car, the 2015 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Retaining Nuts & Pedal Assembly

Courtesy of CHRYSLER GROUP, LLC

Position the pedal assembly (1) to the mounting studs.
Install the three pedal assembly retaining nuts (2, 3) and tighten to the proper specification. Refer to FUEL INJECTION, GAS, SPECIFICATIONS .

Fig 2: Accelerator Pedal Adjuster Motor & Electrical Connectors
Courtesy of CHRYSLER GROUP, LLC
Connect both electrical connectors at the Accelerator Position Sensor (APPS) (2).
Connect the electrical connector at the accelerator pedal adjuster motor (1).
Install the steering column opening cover. Refer to COVER, STEERING COLUMN OPENING, INSTALLATION .
Connect the negative battery cable.

Fig 3: Cable Attachment To Accelerator Module
Courtesy of CHRYSLER GROUP, LLC
If equipped with adjustable pedals, synchronize the accelerator pedal to the brake pedal and then connect the adjuster cable (1) to the accelerator pedal adjuster motor (2). Refer to PEDAL(S), BRAKE AND/OR ACCELERATOR, ADJUSTABLE, INSTALLATION .