LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2012 >> Compass Limited, AWD, Automatic CVT, CVT2 >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection, Diesel >> Sensor, Boost Pressure >> Removal >> Removal

Sensor, Boost Pressure: Removal: Removal

Fig 1: Mixing Chamber, Harness Connector, Boost Pressure Sensor & Bolts
GC0138080Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect the negative battery cable.
  2. Remove the engine cover.
  3. Disconnect the boost pressure sensor (3) harness connector (2).
  4. Remove bolts (4) and the boost pressure sensor (3) from the mixing chamber (1).
scientia non olet · About LEMON Manuals