Diagnostic Test
WARNING: This page is about a different car, the 2020 Chrysler 300 and 2019 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
CHECK IF THE DTC IS ACTIVE
- With a scan tool, read and record ITM DTCs.
- With the scan tool, erase ITM DTCs.
- Turn the ignition off and remove the key from the ignition.
- Lock and close all doors to allow the VTSS to go from pre-arm to armed status and wait one minute.
- Disarm the VTSS.
- With the scan tool, read ITM DTCs.
Does the scan tool display this DTC as active?
Yes
- Using the scan tool under Miscellaneous functions initialize the Intrusion Transceiver Module.
- Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST .
No
- Test complete. The DTC is not active at this time.
- Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST .