When Monitored

WARNING: This page is about a different car, the 2016 Dodge Charger and 2015 Dodge Charger. However, it is still accessible from the selected car via links, so may be relevant.

This diagnostic runs continuously when the following conditions are met:

TCM supply voltage is between 10 and 16 volts.
Ignition switch RUN position signal is detected via dedicated circuit to TCM.
Engine speed (CAN message) is greater than or equal to 550 RPM.
The above conditions are met for 10 seconds.
There are no ignition switch failures.
There are no CAN bus or CAN message failures between the TCM and BCM.
Monitored continuously once the conditions are met.