LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2012 >> Compass Latitude, 2.4 B, AWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 489 (Electronic Control Modules (Service Information)) >> Module, Drivetrain Control >> Installation >> Installation

Module, Drivetrain Control: Installation: Installation

WARNING: This page is about a different car, the 2016 Dodge Charger and 2015 Dodge Charger. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Drive Train Control Module
GC0095226Courtesy of CHRYSLER GROUP, LLC
  1. Slide the Drive Train Control Module (3) on the mounting stud (6) and over mounting stud (5).
  2. Install the mounting nuts (2 and 4). Tighten the nuts to 16 N.m (12 ft. lbs.).
  3. Install the drivers side foot rest. Refer to FOOT REST, FLOOR, FRONT, INSTALLATION .
scientia non olet · About LEMON Manuals