LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2012 >> Compass Latitude, 2.0 A >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Electronic Control Modules (Service Information)) >> Module, Drivetrain Control >> Operation >> Operation >> Modes Of Operation >> Limp-In Mode

Limp-In Mode

WARNING: This page is about a different car, the 2012 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

This mode is entered when the DTCM has detected an error condition that prevents the system from performing its required task. The DTCM operation will vary depending from modified operation to total system shut down based on the failure that has occurred.

scientia non olet · About LEMON Manuals