Section 530 (Steering System): Pump: Removal: Police
WARNING: This page is about a different car, the 2016 Dodge Charger and 2015 Dodge Charger. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
- Raise and support vehicle. Refer to HOISTING, STANDARD PROCEDURE .
- Remove the right front tire and wheel assembly. Refer to REMOVAL .
- Remove right front wheelhouse splash shield. Refer to SHIELD, SPLASH, FRONT WHEELHOUSE, REMOVAL .
- Siphon power steering fluid from pump reservoir (4).
- Disconnect electrical connectors (1) from Electro Hydraulic Power Steering (EHPS) pump body (3).
- Remove power steering pressure line bolt (2) and position the pressure line away from the EHPS pump.
- Remove EHPS pump bracket (1) mounting bolts (2).
- Remove EHPS pump bracket retaining nut (4) and remove the EHPS pump (1) from the vehicle.