LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2012 >> Compass Latitude, 2.0 A >> Repair and Diagnosis >> External Pages >> Different car >> Section 489 (Electronic Control Modules (Service Information)) >> Module, Fuel Pump Control >> Installation >> Installation

Module, Fuel Pump Control: Installation: Installation

WARNING: This page is about a different car, the 2016 Dodge Charger and 2015 Dodge Charger. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Fuel Pump Control Module Connector & Fasteners
GC0170603Courtesy of CHRYSLER GROUP, LLC
  1. Position the Fuel Pump Control Module (FPCM) to the right quarter inner panel above and behind the right rear wheel house.
  2. Securely install the fasteners (1) that secure the FPCM to the right quarter inner panel.
  3. Connect the body wire harness connector (2) to the FPCM connector receptacle.
  4. Install the trim onto the right quarter inner panel. Refer to CARPET, INSTALLATION .
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals