Module, Integrated Center Stack Screen: Installation: Base

WARNING: This page is about a different car, the 2012 Dodge Charger. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Retainers

Courtesy of CHRYSLER GROUP, LLC

Position the (ICS) screen module into the bezel and install the retainers (1).

Fig 2: Harness Connectors & Integrated Center Stack (ICS) Screen Module
Courtesy of CHRYSLER GROUP, LLC
Connect the harness connectors (2 & 3) to the rear of the Integrated Center Stack (ICS) screen module (1).

Fig 3: Way Connector
Courtesy of CHRYSLER GROUP, LLC

NOTE:
In the event that the locking tab breaks or is broken, do not replace the harness. The connector will still lock and the harness will still function as designed.
Carefully connect the 40 - way connector (1).

Fig 4: Instrument Cluster Bezel Retainer & Bezel
Courtesy of CHRYSLER GROUP, LLC
Install the instrument cluster bezel (2). Refer to BEZEL, INSTRUMENT CLUSTER, INSTALLATION .
Connect the negative battery cable.