LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2012 >> Compass Latitude, 2.0 A >> Repair and Diagnosis >> External Pages >> Different car >> Section 161 (3.6L - Intermittent Condition, Pcm/ECM Programming - Gas, Powertrain Verification Test & Pre-Diagnostic Troubleshooting Procedure) >> Standard Procedure >> Pcm/ECM Reprogramming - Gas >> Section 2 - Additional Pcm/TCM Replacement Procedures >> If a GPEC PCM was replaced, perform the following additional steps and/or routines:

If a GPEC PCM was replaced, perform the following additional steps and/or routines:

WARNING: This page is about a different car, the 2012 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. If the vehicle is equipped with a CVT, verify that the TCM has the latest software calibration available.
  2. PCM Replaced (if equipped with WCM)
  3. Learn ETC
  4. Check PCM Odometer
  5. Check PCM VIN (if NOT equipped with WCM)
  6. TCM Quicklearn (if equipped with EATX)