LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2011 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection, Diesel >> Sensor, Air Temperature, Intake >> Installation >> Installation

Sensor, Air Temperature, Intake: Installation: Installation

Fig 1: IAT/MAP Sensor Harness Connector, Bolt & IAT/MAP Sensor
GC0148204Courtesy of CHRYSLER GROUP, LLC
  1. Inspect and lubricate the sensor O-ring.
  2. Clean IAT/MAP sensor sealing area.
  3. Install IAT/MAP sensor (1) and securely tighten bolt (2).
  4. Connect the IAT/MAP sensor harness connector (3).
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals