LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2011 >> Liberty Renegade, Part Time >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> SENSOR, Coolant Temperature >> Installation >> 2.8L

SENSOR, Coolant Temperature: Installation: 2.8L

Fig 1: Thermostat Housing
GC0145357Courtesy of CHRYSLER LLC
  1. Install coolant temperature sensor in thermostat housing. Tighten sensor to 11 N.m (8 ft. lbs.) torque.
  2. Install the thermostat housing onto engine. Refer to THERMOSTAT, Installation .
scientia non olet · About LEMON Manuals