LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2011 >> Liberty Renegade, Part Time >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> BOTTLE, Coolant Recovery >> Removal >> Non-Pressure System

Non-Pressure System

Fig 1: Identifying Coolant Recovery/Washer Fluid Reservoir
GC0086435Courtesy of CHRYSLER LLC
  1. Disconnect negative battery cable.
  2. Disconnect two washer pump hoses, coolant recovery hose and washer pump electrical connector from the combination coolant recovery/washer fluid reservoir assembly (1).
  3. Remove the fasteners across the upper support and on the lower edges of the reservoir (1 each side).
  4. Remove the combination coolant recovery/washer fluid reservoir assembly (1).
scientia non olet · About LEMON Manuals