Steering System: Pump: Installation: 2.8L-Diesel

Fig 1: Identifying Pump, Bolts & Pulley Access Holes

Courtesy of CHRYSLER LLC

1. Install the pump (1) to the vehicle.
2. Install the three bolts securing the pump (1) to the engine through the access holes (3) and tighten to 28 N.m (21 ft. lbs.).
   Fig 2: Identifying Pump, Pressure Power Steering Hoses, Serpentine Belt & Supply Hose

   Courtesy of CHRYSLER LLC
3. Install the pressure power steering hoses (2). Tighten to 31 N.m (23 ft. lbs.).
4. Reclamp the supply hose (4) to the pump (1).
5. Install the serpentine belt (3). Refer to BELT, Serpentine, Installation .
6. Install the air inlet tube.
7. Install the air cleaner housing.
8. Refill the power steering fluid and bleed the system. Refer to Standard Procedure .