LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2011 >> Compass Limited, FWD, Standard >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> SENSOR, Coolant Temperature >> Installation >> Gas Engine >> Coolant Adapter Mounted

Coolant Adapter Mounted

Fig 1: ECT - World Engine - Coolant Adapter
GC0083975Courtesy of CHRYSLER LLC
1 - ETC
2 - COOLANT ADAPTER
  1. Lubricate the ECT sensor O-ring with coolant.
  2. Install the ECT Sensor (1). Make sure the coolant sensor is locked in place.
  3. Connect the ECT Sensor electrical connector.
  4. Fill the cooling system. Refer to Standard Procedure .
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals