LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2011 >> Compass Limited, AWD, Automatic CVT, CVT3 >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Delivery, Diesel >> REGULATOR, Fuel Pressure >> Installation >> Installation

REGULATOR, Fuel Pressure: Installation: Installation

Fig 1: Identifying Fuel Rail Pressure Sensor Harness Connector
GC0138069Courtesy of CHRYSLER LLC
  1. Install the fuel rail pressure sensor (2) onto fuel rail (3). Tighten to 35 N.m (26 ft. lbs.).
  2. Connect the fuel rail pressure sensor harness connector (1).
  3. Connect the negative battery cable.
scientia non olet · About LEMON Manuals