LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2011 >> Compass Limited, AWD, Automatic CVT, CVT2 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Accessory Drive >> PULLEY, Idler >> Installation >> Installation

PULLEY, Idler: Installation: Installation

Fig 1: Accessory Drive Belt - World Engine
GC0083970Courtesy of CHRYSLER LLC
  1. Position pulley (5 or 9) in mounting position. Install idler pulley mounting bolt. Tighten bolt to 48 N.m (35 ft. lbs.).
  2. Install accessory drive belt (2). Refer to BELT, Serpentine, Installation .
  3. Install belt splash shield.
  4. Lower vehicle.
scientia non olet · About LEMON Manuals