Diesel Engine

Fig 1: Identifying Power Steering Reservoir, Hose and Clamp

Courtesy of CHRYSLER LLC

Slide hose clamps onto both ends of the power steering fluid supply hose far enough to clear the fittings on the reservoir and pump once hose is installed.
Place the fluid reservoir end of the supply hose (4) onto the reservoir (5) supply fitting. Expand the hose clamp and slide it over the hose and fitting. Secure the clamp once it is past the bead formed into the fluid reservoir fitting.
Place the pump end of the supply hose onto the pump supply fitting. Expand the hose clamp and slide it over the hose and pump supply fitting. Secure the clamp once it is past the bead formed into the fluid supply fitting.
Fill and bleed the power steering system. Refer to Standard Procedure .
Check for leaks.