Sensor, Crankshaft Position: Installation
WARNING: This page is about a different car, the 2017 Jeep Patriot and 2017 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
- Install the crankshaft position sensor (1). Tighten bolt (2) to 8 Nm (71 in. lbs).
- Connect the crankshaft position sensor wire harness connector (1).
- Connect the lower charge air tube (3) from the charge air cooler (CAC) inlet (5) and securely tighten clamp (4).
- Install the lower charge air tube (3) to the upper charge air tube (1) to turbocharger and lock the lock ring in place.
- Install the negative battery cable.