INJECTOR(S), Fuel: Installation: Installation

Fig 1: Fuel Injector And Rail

Courtesy of CHRYSLER LLC

1. Apply a light coating of clean engine oil to the upper O-ring.
2. Install injector in cup on fuel rail.
3. Install retaining clip.
   Fig 2: Rail Removal/Install

   Courtesy of CHRYSLER LLC
4. Apply a light coating of clean engine oil to the O-ring on the nozzle end of each injector.
5. Insert fuel injector nozzles into openings in lower intake manifold. Seat the injectors in place.
   Fig 3: Electrical Harness Removed

   Courtesy of CHRYSLER LLC
6. Tighten fuel rail mounting screws to 27 N.m (20 ft. lbs.).
   Fig 4: Harness Clips

   Courtesy of CHRYSLER LLC
7. Install wiring harness clips to the fuel rail mounting studs.
   Fig 5: Electrical Connectors

   Courtesy of CHRYSLER LLC
8. Attach electrical connectors to fuel injectors, refer to STANDARD PROCEDURE - INJECTOR CONNECTOR  for electrical connector installation.
   Fig 6: Fuel Line AT Rail

   Courtesy of CHRYSLER LLC
9. Connect fuel supply tube to fuel rail.
10. Connect the negative battery cable.
11. Use the scan tool to pressurize the fuel system. Check for leaks.