Diagnostic Test
WARNING: This page is about a different variant/trim than selected.
- CHECK IF TIPM CAN BUS DTCs ARE PRESENT
- With the scan tool, read TIPM DTCs.
Are there any TIPM CAN BUS DTCs present?
Yes
- Refer to Diagnosis and Testing and perform the appropriate diagnostic procedure.
- Refer to Standard Procedure and perform AWD VERIFICATION TEST.
No
- Go To 2.
- With the scan tool, read TIPM DTCs.
- CHECK IF ENGINE DTCs ARE PRESENT
- With the scan tool, read Engine DTCs.
Are there any Engine DTCs present?
Yes
- Refer to 2.0L & 2.4L - DIAGNOSTIC CODE INDEX and perform the appropriate diagnostic procedure.
- Refer to Standard Procedure and perform AWD VERIFICATION TEST.
No
- Using the schematics as a guide, check the AWD Module pins, terminals, and connectors for corrosion, damage, or terminal push out. Pay particular attention to all power and ground circuits. If no problems are found, replace the AWD Module in accordance with the service information.
- Refer to Standard Procedure and perform AWD VERIFICATION TEST.
- With the scan tool, read Engine DTCs.