Module, Heated Seat (HSM): Removal

WARNING: This page is about a different car, the 2017 Jeep Patriot and 2017 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of CHRYSLER GROUP, LLC

CAUTION:

The Heated Seat Module mounting tab can be damaged during module removal and installation. Use care to properly align tab to prevent binding that could result in tab breakage.

Position the left front seat to the full rearward position.
Disconnect and isolate the battery negative cable.
Disconnect the wire harness connector (4) from the heated seat module (3).
Unsnap the heated seat module retaining tab (2) from the seat pan (1).
Remove the heated seat module (3) from the vehicle.