Module, Heated Seat (HSM): Installation

WARNING: This page is about a different car, the 2017 Jeep Patriot and 2017 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

The Heated Seat Module mounting tab can be damaged during module removal and installation. Use care to properly align tab to prevent binding that could result in tab breakage.

Courtesy of CHRYSLER GROUP, LLC

Install the heated seat module (3) into the vehicle.
Position the retaining tab (2) with the mounting hole in the seat pan (1). Firmly apply even pressure to the module (3) until the mounting tab is fully seated.
Connect the wire harness connector (4) to the heated seat module (3).
Connect the battery negative cable.
Check for proper heated seat system operation.