Module, Compass: Installation
WARNING: This page is about a different car, the 2017 Jeep Patriot and 2017 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The Remote Compass Module (RCM) must be calibrated after installation.
- Position the RCM (1) on top of the instrument panel (2).
- Install the screws (3) that secure the RCM to the instrument panel.
- Connect the electrical connector (4).
- Install the instrument panel top cover. Refer to COVER, INSTRUMENT PANEL, INSTALLATION .
- Reconnect the negative battery cable.
- Calibrate the compass module.