Key Cylinder
WARNING: This page is about a different car, the 2017 Jeep Patriot and 2017 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
- Place the actuator in the lock cylinder housing to the RUN position (if not already there).
- Insert the key into the key cylinder and turn the key cylinder to the RUN position.
- Align the retaining tab on the key cylinder with the slot in the top of the lock cylinder housing.
- Slide the key cylinder into the lock cylinder housing until the key cylinder retaining tab locks the cylinder into place.
- Rotate the key back and forth, then remove and reinstall it, making sure the key cylinder and lock cylinder housing operate properly.