LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2011 >> Compass Base, 2.0 A, Automatic CVT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (2.4L Engine (Service Information)) >> Engine Block >> FLEXPLATE >> Installation >> Installation

Engine Block: FLEXPLATE: Installation: Installation

WARNING: This page is about a different variant/trim than selected.
Fig 1: Flex Plate
GC0098637Courtesy of CHRYSLER LLC
  1. Install flex plate (1).
  2. Install washer (2).
  3. Install new  flex plate bolts (3) and tighten in a criss-cross pattern to 29 N.m (22 ft. lbs.) plus 51° rotation.
  4. Install transaxle. Refer to Installation . Refer to Installation .
scientia non olet · About LEMON Manuals