LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2011 >> Compass Base, 2.0 A, Automatic CVT >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> MODULE, All Wheel Drive Control >> Installation >> Installation

MODULE, All Wheel Drive Control: Installation: Installation

Fig 1: AWD Control Module
GC0098485Courtesy of CHRYSLER LLC
  1. Position the All-Wheel Drive Module (1) onto the studs.
  2. Install and securely tighten the All-Wheel Drive Module nuts (2).
  3. Connect the All-Wheel Drive Module wire harness connector (3).
scientia non olet · About LEMON Manuals