LINK, Stabilizer Bar: Installation: Installation

Fig 1: Stabilizer Link - Right

Courtesy of CHRYSLER LLC

NOTE: Stabilizer bar link to axle bolt should be tightened with vehicle sitting on its tires

1. Install the stabilizer link (1) to the vehicle.
2. Install the right lower stabilizer bar link bolt (4) to the axle. Tighten to 102 N.m (75 ft. lbs.).
3. Install the right upper stabilizer bar link nut (2) to the stabilizer bar. Tighten to 102 N.m (75 ft. lbs.).
   Fig 2: Stabilizer Link - Left

   Courtesy of CHRYSLER LLC
4. Install the left lower stabilizer bar link bolt (4) to the axle. Tighten to 102 N.m (75 ft. lbs.).
5. Install the left upper stabilizer bar link nut (1) to the stabilizer bar. Tighten to 102 N.m (75 ft. lbs.).
6. Remove the support and lower the vehicle.